Listen to your heart....

02. JBN P SERIES

Description

SPECIFICATION OF “JBN” BRAND “P SERIES” AMPLIFIERS

SIZE : 3U

MODEL

P-7001

P-8001

P-9001

Output 2Ohms 1KHz0.1% THD stereo: 2 x 2000W 2 x 2400W 2X2630W
Output 4Ohms 1KHz0.1% THD stereo: 2 x 1400W 2 x 1700W 2X2000W
Output 8Ohms 1KHz0.1% THD stereo: 2 x 1000W 2 x 1200W 2X1400W
Output 8Ohms 1KHz0.1% THD bridge: 2800W 3400W 3800W
Output 4Ohms 1KHz0.1% THD bridge : 3400W 4200W 4600W
Signal / noise: 105dB 106dB 106dB
Slew Rate: 70v/μs 75v/μs 75v/μs
Damping factor: 500:1 550:1 550:1
Fuse: T25A T32A T32A
Main Power Supply: 220V 50/60Hz
Power Consumption 2660W 2800W 3400W
Input Sensitivity: 0.775V(0dB)
Freq. Response @1 Watt into 8 Ohm: ±0.05dB, 20Hz -20kHz
THD: ≤0.01% Rated Power@ 8Ω1kHz
IMD: ≤0.1% Rated Power@ 8Ω
Input Impedance: 15KΩ/30KΩ hours, unbalance or balance
Crosstalk: ≤-70dB
Input CMRR: ≤-75dB
Indicators: Signal, Protect, Clip, Limited
Connector: Input to carry:3 pins Male XLR, Female XLR
Output to carry: Neutrik Speak on and Bonding Post
Net Weight: 36.25kgs 38kgs 40Kgs
Dimensions:(mm) 483W x 418D x 133H
Characteristic of JBN P Series:

(1). Toshiba transistor
(2). Soft start.
(3). DC protect.
(4). Overheat protect when the temperature of amplifier over 95℃
(5). Overload protect.
(6). Short circuit protect.
(7). Limiter function.
(8). Crossover inside to cut off the low frequency to protect your speaker.
(9). Bridge and parallel mode for choosing.
(10). Sensitivity input selection.
(11). Output impedance selection (4 ohm & 8 ohm)
(12). Ground selection.
(13). Very effective cooling system. The speed of the fan is adjustable according

Description

SPECIFICATION OF “JBN” BRAND “P SERIES” AMPLIFIERS

SIZE : 3U

MODEL

P-7001

P-8001

P-9001

Output 2Ohms 1KHz0.1% THD stereo: 2 x 2000W 2 x 2400W 2X2630W
Output 4Ohms 1KHz0.1% THD stereo: 2 x 1400W 2 x 1700W 2X2000W
Output 8Ohms 1KHz0.1% THD stereo: 2 x 1000W 2 x 1200W 2X1400W
Output 8Ohms 1KHz0.1% THD bridge: 2800W 3400W 3800W
Output 4Ohms 1KHz0.1% THD bridge : 3400W 4200W 4600W
Signal / noise: 105dB 106dB 106dB
Slew Rate: 70v/μs 75v/μs 75v/μs
Damping factor: 500:1 550:1 550:1
Fuse: T25A T32A T32A
Main Power Supply: 220V 50/60Hz
Power Consumption 2660W 2800W 3400W
Input Sensitivity: 0.775V(0dB)
Freq. Response @1 Watt into 8 Ohm: ±0.05dB, 20Hz -20kHz
THD: ≤0.01% Rated Power@ 8Ω1kHz
IMD: ≤0.1% Rated Power@ 8Ω
Input Impedance: 15KΩ/30KΩ hours, unbalance or balance
Crosstalk: ≤-70dB
Input CMRR: ≤-75dB
Indicators: Signal, Protect, Clip, Limited
Connector: Input to carry:3 pins Male XLR, Female XLR
Output to carry: Neutrik Speak on and Bonding Post
Net Weight: 36.25kgs 38kgs 40Kgs
Dimensions:(mm) 483W x 418D x 133H
Characteristic of JBN P Series:

(1). Toshiba transistor
(2). Soft start.
(3). DC protect.
(4). Overheat protect when the temperature of amplifier over 95℃
(5). Overload protect.
(6). Short circuit protect.
(7). Limiter function.
(8). Crossover inside to cut off the low frequency to protect your speaker.
(9). Bridge and parallel mode for choosing.
(10). Sensitivity input selection.
(11). Output impedance selection (4 ohm & 8 ohm)
(12). Ground selection.
(13). Very effective cooling system. The speed of the fan is adjustable according